How To Remove Water Reservoir From Keuring Mini.

Why Should You Remove the Water Reservoir?

The water reservoir in your Keurig Mini is where the water for brewing your coffee is stored. Over time, the reservoir can accumulate minerals and impurities from the water, which can affect the quality of the coffee that the machine brews. 

Removing the water reservoir from the machine allows you to clean it thoroughly, removing any buildup of impurities that could impact the quality of your coffee.

How Often Should I Clean the Keurig Mini?

The recommended cleaning frequency for the Keurig Mini is every three to six months, depending on the frequency of use. If you use your Keurig Mini every day, you should aim to clean it every three months. If you use it less frequently, you can clean it every six months.

However, it is important to note that these are just general guidelines. If you notice any signs of buildup, such as slower brewing times, unusual noises, or a change in the taste of your coffee, you should clean the machine immediately, regardless of when you last cleaned it.

Tools Needed to Remove Water Reservoir from Keurig Mini

Removing the water reservoir from your Keurig Mini is a straightforward process that can be completed with a few basic tools. Here is a list of the tools that you will use in the Process:

• A small Phillips-head screwdriver
• A clean, flat surface to work on.
• A clean, dry towel to place underneath the Keurig Mini to catch any spilled water.
• A Phillips-head screwdriver.
• A pair of pliers.

Step-by-Step Guide How To Remove Water Reservoir From Keuring Mini

Step 1: Turn off and unplug the Keurig Mini

Before you begin removing the water reservoir, ensure that your Keurig Mini is turned off and unplugged. This will ensure your safety during the removal process.

Step 2: Remove the Drip Tray

The drip tray is located at the bottom of the Keurig Mini. To remove the drip tray, simply slide it forward and then lift it out of the machine.

Step 3: Remove the Water Reservoir

The water reservoir is located on the back side of the machine. To remove the water reservoir, follow these steps:

Locate the handle at the top of the water reservoir and pull it up.

Once the handle is in the upright position, grip the reservoir and pull it straight up and away from the machine.

Be careful not to tilt the water reservoir, as this can cause water to spill out.

Step 4: Clean the Water Reservoir

Now that you have removed the water reservoir, it’s time to clean it. First, empty the remaining water from the reservoir. Then, use a clean and dry cloth to wipe down the inside and outside of the reservoir. 

If there is any buildup of minerals or impurities, you can use vinegar and water solution to clean the reservoir thoroughly. Mix equal parts white vinegar and water, fill the reservoir with the solution and let it sit for 30 minutes. After 30 minutes, empty the reservoir and rinse it thoroughly with water.

Step 5: Reattach the Water Reservoir

Once you have cleaned the water reservoir, it’s time to reattach it to the Keurig Mini. To reattach the water reservoir, follow these steps:

Align the reservoir with the opening on the back of the machine.

Insert the reservoir into the machine and push it down until it clicks into place.

Ensure that the handle on the water reservoir is in a downward position.

Step 6: Reattach the Drip Tray

Finally, reattach the drip tray by sliding it back into place at the bottom of the Keurig Mini.

How to clean a keurig mini without vinegar:

if you prefer not to use vinegar or if you have a sensitivity to its odor, there are alternative ways to clean your Keurig Mini. In this article, we will discuss how to clean a Keurig Mini without vinegar.

Method 1: Using Lemon Juice

Lemon juice is an excellent natural cleaning agent that can be used to clean your Keurig Mini. Here’s how to do it:

Step 1: Fill the water reservoir with equal parts of water and lemon juice.

Step 2: Turn on the coffee maker and allow it to brew a few cups of the solution.

Step 3: After the brewing cycle is complete, dispose of the lemon juice and water mixture.

Step 4: Fill the water reservoir with clean water and run a few brewing cycles to rinse the coffee maker thoroughly.

Method 2: Using Baking Soda

Baking soda is another natural cleaning agent that can be used to clean your Keurig Mini. Here’s how to do it:

Step 1: Mix one tablespoon of baking soda with one cup of warm water.

Step 2: Dip a clean cloth or sponge into the solution and use it to clean the exterior of the Keurig Mini.

Step 3: Remove the drip tray and the K-cup holder and soak them in the baking soda solution for 15-20 minutes.

Step 4: Rinse the parts thoroughly with clean water and dry them with a clean towel.

Step 5: Fill the water reservoir with clean water and run a few brewing cycles to rinse the coffee maker thoroughly.

Method 3: Using Dish Soap

Dish soap is another effective cleaning agent that can be used to clean your Keurig Mini. Here’s how to do it:

Step 1: Mix a few drops of dish soap with warm water.

Step 2: Dip a clean cloth or sponge into the solution and use it to clean the exterior of the Keurig Mini.

Step 3: Remove the drip tray and the K-cup holder and soak them in the soapy water for 15-20 minutes.

Step 4: Rinse the parts thoroughly with clean water and dry them with a clean towel.

Step 5: Fill the water reservoir with clean water and run a few brewing cycles to rinse the coffee maker thoroughly.

Faqs:

Conclusion:

Cleaning and maintaining your Keurig Mini is essential to ensure that it functions effectively and produces great-tasting coffee every time. Removing the water reservoir and cleaning it regularly is an important aspect of maintaining the machine